MIL-N-46025B(MR)
Table V. Tolerances of cut straight lengths
Tolerance, inch
Length, feet (plus only)
Up to 6, incl.
0.125
Over 6 .250
3.3.3 Straightness. The deviation from straightness shall not be greater than the amounts in table VI.
Table VI. Straightness tolerances of bar
Distance between parallel faces,
Permissible deviation
(depth of arc)
inch inch
All sizes 0.025 per foot of length
3.4 Dimension tolerances, flat wire (ribbon).
3.4.1 Thickness. The thickness of the flat wire (ribbon) shall not vary by more than the amounts shown in table VII.
Table VII. Thickness tolerances for flat wire (ribbon)
Thickness,
Tolerance, inch
inch (plus and minus)
Up to 0.006, incl.
Over 0.006 to 0.009, incl.
Over 0.009 to 0.025, incl.
Over 0.025 to 0.048, incl.
0.0003
.0005
.0007
.001
Over 0.048 to 0.187, incl. .002
3.4.2 Width. The width of flat wire (ribbon) shall not vary by more than the amounts shown in table VIII.
5
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business